Auroras are beautiful and magical but the moon is not a source of light for most people.
That’s why you need to get creative and build your own solar lantern.
Here’s how to do it.1.
Find a source.
The first thing you’ll need to do is find a place that will supply you with solar energy.
If you live in the US, your local utility company or solar company can provide you with some solar power.2.
Buy some batteries.
These are cheap and come in a wide range of sizes.
You’ll want to choose one that’s small enough to fit in your pocket.3.
Buy a couple of bulbs.
For most people, that means a few hundred watts.
But if you have an older or smaller home, you may want to consider buying a few of these small-sized solar bulbs.
These bulbs will power your home for hours at a time.4.
Buy your own.
You can build your lantern from scratch or buy an off-the-shelf solar lantern kit.
Most solar lantern kits will include instructions on how to set up your lantern, how to light it, and how to use the battery.
But don’t expect to be able to just buy a lantern that comes in the box.
You need to build your thing from the ground up.
You can get a solar lantern to look just like a regular lantern by using a solar reflector.
If your roof has a reflective surface, you can make your lantern reflect sunlight on that surface.
If not, you could make it reflect sunlight from the ceiling to your kitchen.5.
Cut the panels.
You don’t have to use a big torch to cut the panels to fit your lantern.
But you can cut the bottom of the lantern so that the panels can sit flush against your roof.
The trick is to use an angle grinder.
You should be able get a bit of a grinding motion.6.
Put the batteries in.
If there are solar panels in your home, the batteries are probably there.
If they aren’t, they’re probably somewhere you can buy a solar panel.7.
Turn the lights on.
When you turn the lights off, the solar panel will still be on and you can see the solar reflectors shining through.
You could then use the lights to start a fire or turn on the sprinkler system.
If you have a regular solar lantern, you won’t have any battery to charge the batteries.
Instead, you’ll be using solar energy to light the lantern and then you’ll use that energy to turn on your home lights.
You might also use the energy to power your lights.
If so, you’re good to go.
If, however, your home has a lot of solar panels, you might want to check out our guide to solar energy, which provides more information on how these systems work.8.
Turn on the light.
If the lights are still on, turn on their LEDs.
The LEDs will be lit to show the solar panels are still lit.
When the lights turn off, you should see a small red LED light blinking at the top of the solar lantern as it is being turned on.9.
Check the battery level.
Your batteries will be full.
If a battery is full, the LEDs will turn off.
If it’s not full, your lantern should not turn on and it will stay lit.
But it’s good to know that the LEDs are still lighting the lantern.10.
Turn off the lights.
Then you can check the batteries and check that they’re still full.
Once your batteries are full, turn the light back on and your lantern will light up again.
You’ll have to check the battery levels frequently during your home’s power outage, especially if the solar system is out of commission or there’s no power.
It’s a good idea to take your solar lantern back to your utility company for a battery test, so you can ensure it’s working properly.
You also may want your solar system to be powered down as soon as possible.
If that’s the case, it may be necessary to disconnect it from your home and replace it with a battery replacement, which can be expensive.